aquakote waterproofing concrete pond fish pond fish pond liner repair concrete ponds pond liner pond lining system sealing concrete koi-kote pond sealer pond refurbishment waterproofing concrete concrete ponds pond liner repair fish breading units
pond sealer waterproofing concrete
pond lining system Home Sweet Home koi-kote pond liner repair
concrete ponds click here to view full details about koi-kote pond liner repair koi-kote
storage vessels read about koi-kote holding tanks pond liner repair
waterproofing concrete click here to view detailed case studies of where koi-kote has been used holding tanks contact koi-kote pond refurbishment pond lining system
koi carp holding tanks
pond fish view our competitive prices and delivery details koi kote filters
fish breading units koi-kote is easy to use, but we do suggest you read the application tips before use pond sealer fish breading units
aquakote sealing concrete
pond liner repair storage vessels
pond fish pond liner pond sealer
pond liner pond fish
pond sealer pond fish

 
The Product

 
Benefits Of Koi-Kote

 

Koi-Kote is a completely solvent free, two pack Epoxy resin supplied in 2 kilo packs, designed to provide a seamless lining for ponds, filters, holding tanks, fish breeding units, water features and storage vessels.

 
pond lining system Will not harm fish koi-kote Manufactured to ISO 9002 Standards
No primer necessary Full backup
Exceptionally easy to apply by brush or roller Competitively priced
Can be applied in damp conditions Smooth hard surface
Easily cleaned to remove algae Seamless lining, no creases for bacteria to breed
No smell or fumes

Solvent free
   
Sample of two coat system

Preparation
Koi-Kote is a surface tolerant lining but as with all coatings the better the surface preparation, the better the performance.

For Concrete the latency should be removed by mechanical abrasion.

For screeded ponds remove loose dust. The smoother the screed the smoother the finish. Note: When using sharp sand render, only use a float finish. When using fibres in render these should be burnt off prior to application.

For GRP, the surface will require abrading.

Application - (Mixing)
Koi-Kote comes in pre-measured amounts; mix A & B until a consistent colour is achieved; a power mixer is necessary to achieve thorough mixing. Do not mix too fast or for too long as it produces heat that will shorten its usable life.
Sample of two coat system
of Koi-Kote 300-500 microns
100% SOLIDS
"WHAT YOU SEE IS WHAT YOU GET"
TESTER SUPPLIED TO TEST EACH COAT

free depth tester included with each koi-kote order. first dip into the coated surface then read off in microns the thickness of the coating

 

Application - (Applying to substrate)
Koi-Kote is available from Aquakote Systems Ltd (see price list) and may be applied by brush or roller, in 2 coats to achieve a Dry Film Thickness (DFT) of between 300 and 500 microns. Normally at 20-25°C, Koi-Kote will be touch dry in two hours and the final coat may be applied. The pond may be refilled when the 2nd coat is hard (cured). Temperature will affect the cure time as A + B is a chemical reaction:

High temperature 20 - 25°C, short pot life (see application tips)  
Low temperature 5 - 10°C, long pot life  

When cured, wash with hot soapy water and rinse thoroughly prior to introducing fish.

Coverage
1 Kilo will provide a theoretical DFT of 400 microns on an area of 2m² for two coats. Allowance must be made for rough or absorbent surfaces etc.

 

Standard Colours
Base Coat - Blue or Grey.

Top Coat - Black, BR Green, Grey or Clear

Shelf Life
Stored in a cool dry place Koi-Kote can be kept un-opened for up to one year from date of purchase.

For safety information please see our separate Safety Data Sheets.

Top